This product is 99% new. But the packing and the box were damaged during transportation, so they were disposed of second-hand. Leofoto LS-224C+LH-25+DC-222C ranger carbon tripod with ballhead light weight. Height (w column): 63.6 in /1615mm Max. Height (w/o column): 51in / 1300mm Min.
Height: 5.1in /130mm Folded length: 18.5 in /470mm Leg Section: 4 Max load: 13.21b/ 6kg Weight: 2.0lb/0.91kg 10X Layers Carbon fiber Tubes: 0.87"/ 0.75"/ 0.6"/ 0.5" (22/19/16/13mm). The lightweight Leofoto Ranger LS-224C carbon stand is the bigger brother of the LS-223C. The tripod legs, however, are a lot longer and that is why this tripod has a larger working height without being collapsed awkwardly.
You can easily take this tripod with you wherever you go! The Leofoto LS-224C tripod comes with an ultra-compact Leofoto LH-25 headset, a carrying bag, a multi-tool and a set of stable spikes. Leofoto has designed the light and compact Leofoto Ranger tripods to provide stability under all conditions, so whoever goes into nature will take a Leofoto Ranger tripod. The Rangers are made of 10 layers of cross-woven, reinforced carbon, so you are assured of a rock-solid yet lightweight tripod.The maximum working height of the LS-224C is 117 centimeters without the middle column or ball head. Screw the loosely supplied center column onto the LS-224C, then you reach a working height of up to 148.5 cm. The minimum working height is only 13 centimeters (including the ball head), which works nicely for macro photography just above the ground. The Leofoto LS-224C measures only 47 centimeters with LH-25 ball head, while the weight is only 910 grams.
Therefore, you can easily take this trip with you anywhere you travel. The carrying capacity of this compact travel tripod is 6 kilos, which is more than sufficient for a compact dslr or system camera with a standard zoom or telephoto lens. The ultra-low weight of the Ranger carbon stands has to do with the modular construction without center column. The base tripod has a tripod plate of milled aircraft aluminum with a 3/8-inch tripod screw. You can immediately mount a ball head if you are very lightweight, but if you need more working height, first screw the loose center column on the tripod.The carbon tripod legs of the LS-224C consist of four smoothly extendable sections with a leg diameter of up to 22mm and a minimum leg thickness of 15mm. You simply unscrew and fasten them with the twistlock screw lock: a simple rotational movement is sufficient. The tripod legs have rubber feet, and for a stable grip on any surface you can change them for the included stainless steel spikes. The ultra-compact but extremely strong Leofoto LH-25 headset comes with the LS-224C tripod. This little ball head is only 6.9 centimeters high and made of black anodised aircraft aluminum for great durability. Thanks to the professional PU-25 Arca-Swiss quick release plate, you can quickly set your camera on this tripod head. The adjustment wing on the side of the head controls the horizontal adjustment of the entire head, which can rotate 360 degrees. Thanks to the notch beneath the bullet you can switch from landscape to portrait mode at lightning speed! You do this simply by pulling the wing forward and adjusting the position. The LH-25 can be positioned very precisely with the aid of the graduated scale on the tripod plate and the built-in spirit level. This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods". The seller is "masterfoto2014" and is located in this country: US. This item can be shipped to United States.