+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning. + A large tension control knob is easy to use, even with gloves. + Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.Tripod Legs: + All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves. + Tripod feet are made of heavy duty rubber and twist to expose retractable spikes. + Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography. + Leg angle adjustments are made with an all-new slide switch. + The yolk of each tripod is extremely strong to avoid unwanted movement. + A bubble level is incorporated along with two 3/8 threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of'hands' for flashes, LED lights, etc.
+ All touch points on the tripod are also colored red for easy identification. + Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches. KIT SPECIFICATIONS - Maximum Working Height: 68 3/4" / 174.6 cm - Maximum Height with column down: 55 5/8" / 141.3 cm - Minimum Working Height: 7" / 17.8 cm (legs flat on ground) - Minimum Working Height:10 7/8" / 27.6 cm (legs in lowest locked position) - Folded Length: 23 1/8 / 58.7 cm - Maximum Load: 22 lbs / 10 kg - Weight: 3 lbs 15 oz / 1.79 kg. BALL HEAD SPECIFICATIONS - Height: 3 7/8 / 9.8 cm - Weight: 15 3/8 oz /. 44 kg - Uses Quick Release Plate #8090.
TRIPOD LEG SPECIFICATIONS - Maximum Working Height: 64 7/8" / 164.8 cm - Maximum Height with column down: 51 3/4" / 131.5 cm - Minimum Working Height: 3 1/8" / 8 cm - Folded Length: 19 1/4" / 48.9 cm - Weight: 2 lbs 15 5/8 oz / 1.35 kg. Tool kit with storage pouch. 2 thread adapters (1/4"-20 to 3/8"). Standard & low profile memory lock dials for ball head.