Is a package comprising of the Ultimate 1030D fluid head, 30L carbon fiber tripod, mid-level spreader, set of rubber feet, and soft carrying case. The fluid head supports up to 41 lb at 6 center of gravity with a ±60° tilt range.Without the head attached, the carbon fiber tripod adjusts from 22 to 61.8" and folds down to 29.5" for storage and transport. The tripod on its own can support payloads up to 209 lb.
The mid-level spreader and rubber feet holds the tripod legs in position, providing rigidity and stability to the overall system. The tripod system packs into the soft carrying case for easy transportation. OConnor Ultimate 1030Ds Fluid Head Package.OConnor's Ultimate 1030Ds Fluid Head Package. Is an updated version of the previous Ultimate 1030Ds Fluid Head Package, with the difference being a change in top platforms. The new package includes a sideload quick release top platform. The previous package was offered with a mini European quick release top platform. The sideload platform affords an extended range of movement for balancing front-heavy setups. The remaining components of the package are: the 1030Ds head with a 100mm ball base, a 100mm tie down for the base, a 12" pan handle, and an 11.5" handle extension. The ball base is compatible with 100mm tripod bowls and is interchangeable for optional 1030-compatible 150mm bases and with Mitchell flat bases.
The handle has a 30° bend. The head features a +/- 60° tilt range and within this range supports payloads of 53 lbs at 4" above the platform, 41 lbs at 6", and 33 lbs at 8.
Counterbalance reaches all the way down to zero, useful for lighter cameras. Counterbalance adjusts by a crank-style control that pulls out of the rear of the head.
Pan and tilt unlock through a single-handed squeeze. The package is compatible with many 1030 accessories. Updated version of the previous Ultimate 1030Ds Fluid Head Package.
Updated with a sideload quick release top platform. OConnor 30L Carbon Fiber Tripod System. Consists of their 30L 2 stage carbon fiber tripod legs, a removable mid level spreader and 3 rubber feet that snap over the legs' dual foot spikes. The system works with tripod heads that have a 100 mm ball, such as OConnor's 1030D and 1030DS.
The tripod legs weigh only 8.8 pounds, yet they can support 209 pounds of weight and extend from a minimum height of 22.0" to a maximum height of 61.8" when using the included mid level spreader. The mid level spreader and individually adjustable legs allow you to set up the tripod on rocky, uneven terrain and even on stairs, and the mid level spreader design avoids the stresses and instability that a ground spreader can cause when working on uneven surfaces.
When working situations require it, the spreader can be detached individually from each leg and the dual spikes at the end of each leg provide a solid anchor point when working on soft ground. The removable rubber feet snap onto the dual spikes for working inside or on slippery surfaces.
The legs feature lever locks for quick and secure clamping. A built-in leg clip on an elastic cord pulls out and wraps around the legs to secure them together when the legs are not in use, then retracts out of the way when the legs are in use. The legs also incorporate a carry handle into its design. These features simplify transporting the 30L tripod system to or from a shoot. We Deal in Both-New & Used Gear.
This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods". The seller is "diecastcarsstore" and is located in this country: US. This item can be shipped worldwide.