Slik Pro 824CF Carbon Fiber Tripod with Slik SVH-501 Video Head. Make us a reasonable offer and this is yours. The SLIK Pro 824CF has four leg sections that when fully extended reach a height of 64 inches but when completely retracted the tripod is only 18.8 inches in length. So the SLIK Pro 824CF would be usable with the highest number of tripod heads from SLIK and others the tripod has an industry standard 3/8 mount post that is reversible to 1/4-20. The 800 series carbon fiber tripods all have legs made up of carbon Fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.The legs also feature A. S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg's stages at once by twisting the three large rubber grips with one hand. The SVH-501 is a compact sized video head weighing just 1 pound and capable of supporting 6.6 lbs of gear in any position, while providing smooth pan and tilt movements. To keep the size and weight minimal, drag control knobs are not included, but the head provides the right amount of resistance when moving the head, making video movements smooth and animal tracking effortless. The angled pan handle can be positioned for left or right-hand control and rotated a full 360-degrees so the handle's angle is in the best position for any situation. The head includes a 70mm Arca-type quick release plate that can slide in from the front, back or mounted from the top. The locking knob is large and easy to access with the camera mounted. It also includes a release stopper to prevent the plate from sliding off the head in the event you forget to tighten down the plate. The stopper can also be rotated out of the way to make mounting and removal a bit faster. The quick release plate sports a tool-less wing-nut design that lets you attach the plate to your camera without a coin or tool. However, included is a coin slot for those that prefer it.
Maximum Load: 6.6 lbs / 3.0kg. Height: 4.3 in / 110mm. Weight: 1 lb / 476g. Tripod Mount Thread: U1/4" (3/8" adapter included). Base Diameter: 1.8 in / 48mm.
Check out my other items. If there is a problem with an item and you wish to send it back.We will inspect it when received. Blister pack items will not be taken back if opened.
This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods". The seller is "cameraland" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Australia, South Africa, Ireland, Mexico, New Zealand, Singapore, United Arab Emirates, Malaysia.