Head Carbon Fiber

Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader 3732

Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader 3732
Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader 3732

Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader 3732
Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader and Case. Mount your DSLR, mirrorless, cine, or ENG camera using this complete CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader and Case system from Miller for your studio or field video production. The system includes a CX6 fluid head, a fixed-length pan handle, a 75 Sprinter II carbon fiber tripod, a ground spreader, and a soft carry case. The CX6 fluid head features a 16-step counterbalance system, a 3-step pan/tilt drag, a side-load plate, and a maximum payload of 26.4 lb. The 75 Sprinter II carbon fiber tripod supports a maximum payload of up to 66.1 lb, features a 75mm bowl head and spiked feet, supports a ground spreader, and has a built-in carry handle. Read more below about the items in this kit. The Miller CX6 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance.

Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 26.4 pounds, adequate for small cinema cameras with rigs or medium sized ENG camcorders. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations.

The plate offers 2.4 of sliding range to balance your rig. To survive fast-paced shooting environments, the CX6 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation.

Even in harsh conditions, the CX6 will perform reliably. The base of the CX6 is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX6 in dark environments. A fixed length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod (Ground Spreader Ready). The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible ground spreaders, rubber feet, and dollies are available separately. Two-stage carbon fiber tripod for heads with 75mm ball.

Maximum payload up to 66.1 lb. Compatible with separately available ground spreader.

Height extends from 17.3 to 60.4. Built-in carry handle for portability. Miller 470 On-Ground Tripod Spreader - for Sprinter Tripods. A On-Ground Spreader is chosen when shooting is performed on a level surface, such as studio, city streets, offices, sport fields and stadiums.

It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches directly to the feet at the bottom of a tripod and its arms are telescopic to allow extension of a tripod leg without detaching the spreader. Suits all SPRINTER Single Stage and 2-Stage tripods. Miller Pan Handle for Compass15 and Compass20 Fluid Heads. The Miller Pan Handle for Compass15 and Compass20 Fluid Heads is a 16mm fixed-length pan arm.

The main tube is black-anodized aluminum alloy and features a comfortable rubber grip. Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black). Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads.

Carry the case with the dual strap handles or padded grab handle. An external pocket and card holder makes case identification easier. TransFilm is specialized in Sales, Service, Rentals of Camera Support Equipment such as Sachtler, OConnor, Vinten, Cartoni, Miller, Libec, Manfrotto, Arri, Mitchell, Ronfor Baker and more.

With more than 30 years experience in camera support systems repair, our business has been providing quality repair service at reasonable rates to Rental Houses, Broadcast Networks, Professionals, Hobbyists and other repair shops since 1987. Unlike others, TransFilm is first and foremost a service facility. We Deal in Both-New & Used Gear. This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods".

The seller is "diecastcarsstore" and is located in this country: US. This item can be shipped worldwide.

  • MPN: 3732
  • Material: Carbon Fiber
  • To Fit: Camcorder, Camera
  • Model: Miller CX6 Head
  • Head Type: Fluid Head
  • Head Included: Yes
  • Brand: Miller
  • Type: Tripod


Miller CX6 Head and 75 Sprinter II Carbon Fiber Tripod with Ground Spreader 3732