Head Carbon Fiber

Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head

Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head
Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head
Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head
Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head
Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head
Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head

Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head

Manfrotto MT055CXPRO3 carbon fiber tripod with MHXPRO-BHQ XPRO ball head and Manfrotto spiked foot set - all in excellent condition. It was used only once and has been carefully cared for.

All mechanisms and attachments are completely functional. It is very clean with no nicks or scrapes and only minor scuffing in a few locations. The photos show the actual item. This sale includes a new, unused Manfrotto spiked foot set and instruction materials shown in the sixth picture.

Manfrotto 055CXPRO3 Carbon Fiber Tripod. Is part of the 055CX series which was designed to meet the needs of demanding professionals and photography enthusiasts who want the best in terms of performance and quality. It has been improved with the use of carbon fiber tubing for its legs. Thanks to innovative production techniques - which allow for high quality 100% carbon tube structures - the 055CX series guarantees a higher load capacity and an increased height with a lighter overall weight (-20%) thanks to a completely new design, which allowed to lighten the components.

The 055CXPRO3 is a 3-leg section tripod, with a center column design that allows it to be used in either vertical or horizontal position. By extending the column to its highest vertical position, the column can be swung over to horizontal without removing the head or disassembling the column itself. The 055CXPRO3 also features several other improvements, such as an improved leg locking system, redesigned angle adjustment levers, and a leveling bubble that is incorporated into the head plate. Transverse center column can be easily swung 90 degrees for low angle shots. Padded grips on the top sections of 2 legs make for a firm grip in cold or inclement weather. Four leg angle settings - 23,47, 66, 89° compensate for uneven terrain. Carbon fiber with magnesium castings. Maximum Height w/o Column Extended. 4.5 (11.5 cm).

17.6 lbs (8.0 kg). 3.64 lb (1.65 kg). Yes, 23, 47, 66, 89°.

29.2, 24.8, 20.4 mm. Yes, with 90° transverse feature. 26.5 x 5.53 x 5.5. XPRO Magnesium Ball Head from. Features an integrated RC2 quick release cam lock and a Quick Release Plate.

RC2 compatible quick release plates can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting. The XPRO Magnesium Ball Head with Quick Release Plate has a load capacity of 22.1 lb and can be attached to tripods or other support systems that feature a 3/8-16 mount. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. An additional knob opposite the secondary locking knob can be rotated to apply tension control to the ball-and-socket joint's movements. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the quick release plate which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface. 22.1 lb load capacity. Compatible with tripods or support systems that feature a 3/8-16 mount.

Uses ball-and-socket joint to help maximize pan-and-tilt flexibility. Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place. Integrated RC2 quick release cam lock. Secondary locking knob allows head to rotate 360°. Dedicated tension control knob for the ball-and-socket joint's movements.

One bubble level for landscape orientations and one bubble level for portrait orientations. 22.1 lb / 10.02 kg. 1.77 / 45.0 mm. H: 4.5 x W: 2.4 / H: 115.1 x W: 60.0 mm. 17.6 oz / 0.5 kg.

5.3 x 4.9 x 3.65. The item "Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head" is in sale since Monday, March 8, 2021.

This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods". The seller is "lighthouse824" and is located in Santa Monica, California. This item can be shipped to United States.

  • Brand: Manfrotto
  • Custom Bundle: Yes
  • Model: Manfrotto 055CXPRO3 with MHXPRO-BHQ XP
  • Type: Tripod
  • Bundle Description: 055CXPRO3 Tripod with MHXPRO-BHQ XPRO Ball Head
  • Compatible Brand: Universal
  • Material: Carbon Fiber
  • To Fit: Camera
  • Head Type: Ball Head
  • MPN: Does Not Apply
  • Features: 360 Degree Rotation

Manfrotto 055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ XPRO Ball Head