Camera Video Monopod- 10kg Load Fluid Drag Head Professional Camera Travel Stand

Camera Video Monopod- 10kg Load Fluid Drag Head Professional Camera Travel Stand. Smooth tilt and pan damping movement. 360° pan and Front tilt -75° / +90°. Fluid head adopt hollow-carved design, 10kg high load capacity with only 0.85kg weight.

Use special damping oil with antifreeze characteristics, Support for use below minus 40 degrees. Compatible with 65mm/75mm bowl size tripod and monopod. Features ¼'' screw with also 3/8'' adapter to mount your camera. Fast set up, quick release plate support baroclinc and Horizontal insertion type installation, common use in Manfrotto 5 series. Extended QR plate with 10.8mm, ± 4cm sliding distance.

Safety switch, can well prevent the equipment from falling off accidentally, Instantly locks camera plate to head, safely releases camera and plate from head. Built-in bubble level, quickly and simple levelling. Standard 3/8 threaded screw hole on the bottom, makes the suitable for all tripods, monopods, light stands and camera sliders.

Copper threaded hole, more durable. Front Tilt: -75 degree to 90 degree. Tripod Mount Thread Size: 1/4 and 3/8 inches. Tension Control: Pan and tilt adjustment knobs. Construction: Aluminum & Plastic(you also can choose carbon firber material when you place the order). Max working height:188cm/74.01inch. Weight: 2.1kg(the carbon fiber weight is 1.98kg). 1x 3/8 to 1/4 inch Conversion Screw.

---