Sachtler FSB 10 T ENG 2 MCF Carbon Fiber Tripod System. Is a complete 100mm tripod system for loads up to 26.5 lb. It includes the FSB 10 T Fluid Head, ENG 2 CF 2-Stage Carbon Fiber Tripod Legs, mid-level spreader, rubber feet, and padded carry case that fits the entire system.The FSB 10 T Fluid Head is designed for cine-style cameras, such as the Sony FS7 and Canon C500. It features a Touch & Go mounting mechanism with a 2.4 sliding range, and offers a spring-loaded ten-step counterbalance and 5+0 step pan/tilt drag. The pan range is a full 360°, and tilt range is +90 to -70°. The FSB 10 also has an illuminated bubble level ideal for dark environments, and comes with a pan bar that can be attached to either side.
The ENG 2 CF 2-Stage Tripod Legs feature a minimum height of 15.5" and maximum height of 59", with a convenient Quick Clamp Torque Lock system. A built-in safety cord prevents the legs from opening while in transport, and a folding handle provides for comfortable carrying while in the horizontal position. The mid-level spreader is constructed of aluminum and is adjustable in four steps. The rubber feet are the snap-on clamp type. The tripod bag is made of water-resistant Cordura nylon and can be carried by its handles or adjustable shoulder strap.FSB 10T Fluid Head with Touch & Go Mechanism. Supports payloads up to 26.5 lb. Designed to accommodate digital cinema-style cameras, such as the Sony FS7, Canon C500, and Blackmagic Ursa Mini. The head offers Sachtler's Touch and Go quick release with a sliding range of 2.4. It also features a 10-step counterbalance along with horizontal and vertical 5-step drag controls. In addition, a zero setting on the pan and tilt drag controls allows for unencumbered movement of the head. The fluid head features a 100mm bowl interface for tripod mounting and incorporates an illuminated bubble level for easy leveling in poor light conditions.
A pan handle, which can be mounted on either side of the head, is also included. Leveling Ball with Flat Base.The fluid head features a 100mm ball for quick leveling on your tripod legs. The ball features a flat base so you can also mount it on a flat surface. Frictionless leak-proof fluid damping with five levels of drag enable precision adjustment to match the needs of your shot. A zero setting allows complete disengagement of drag for fast panning. Featuring a touch and go quick release plate that you can mount on your camera or baseplate. The fluid head's camera platform has 2.4 of travel for balancing your camera on the head.
CF-100ENG 2CF Carbon Fiber Tripod Legs. Two stage tripod, provides maximum stability and carrying capacity. Constructed and drawn out of one-piece carbon fiber material, it is twist resistant and lighter than dural aluminum. It features a 100mm / 4" bowl, tube diameter of 22mm (0.87") and is fitted with the Sachtler quick clamping system, so you can securely - and visibly - lock the tripod. The CF 100 ENG 2CF's double extension provides greater stability, allowing an extended height range with a payload of 88 lb.
And with a weight of only 5.3-lb it's extremely lightweight, solid and stable. Carbon fiber construction with 22mm (0.87) tube diameter.
100mm / 4 bowl base. Maximum height of 59.0-inch. Quick clamping system, locks tripod legs in seconds. Supports up to 88 lb. Built-in transport safety cord, preventing the legs from opening while in transport.
Folding tripod handle, for comfortable carrying of tripod in horizontal position. For extra stability the CF-100 ENG HD 2CF is also available for a load capacity of 210 lb at a height of 61.8-inch. Is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and its arms are telescopic to allow extension of a tripod leg without detaching the spreader.
Fits all 100mm, 150mm bowl, (except short tripods) OB-2000M, Cine 2000 and Cine 2000 Medium tripods. Rubber Feet (Set of 3). Snap these feet onto your tripod when it's not possible to use the dual spiked feet, ideal on slippery and glossy floors. For all Tripods with Off-Ground Spreaders (Except OB-2000/M and Cine 2000/M tripods).COMES WITH HARD CASE "HPRC 6300W" (See Picture). The item "Sachtler FSB 10 Head & Carbon Fiber Tripod (100mm)" is in sale since Monday, December 3, 2018. This item is in the category "Cameras & Photo\Camera & Photo Accessories\Accessory Bundles". The seller is "quality_film_equipment" and is located in Los Angeles, California.
This item can be shipped to United States.