Manfrotto MT055CXPRO4 Carbon Fiber Tripod. Is a 4-section support that replaces the 055CXPRO4 tripod. It has a load capacity of 19.8 lb and extends from 3.5" to 66.9". Its carbon fiber legs are secured by the Quick Power Locks.
These updated flip locks increase the tripod's rigidity by 50% compared to its predecessor. A redesigned center column has a "one finger" operation, and includes an Easy Link 3/8-16 attachment for attaching accessories such as an LED light or a reflector via a compatible arm. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull's eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes.
Features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting.
The XPRO Magnesium Ball Head with 200PL-14 Quick Release Plate has a load capacity of 22.1 lb and can be attached to tripods or other support systems that feature a 3/8-16 mount. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. An additional knob opposite the secondary locking knob can be rotated to apply tension control to the ball-and-socket joint's movements. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface. 22.1 lb load capacity.Compatible with tripods or support systems that feature a 3/8-16 mount. Uses ball-and-socket joint to help maximize pan-and-tilt flexibility. Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place. Integrated RC2 quick release cam lock.
Secondary locking knob allows head to rotate 360°. Dedicated tension control knob for the ball-and-socket joint's movements. One bubble level for landscape orientations and one bubble level for portrait orientations. Compatible with Manfrotto RC2 quick release cam lock. Measures 1.7 x 2.1 x 0.4 and has a rubberized, non-slip surface.
The item "Manfrotto MT055CXPRO4 055 Carbon Tripod & XPRO Magnesium Ball Head" is in sale since Wednesday, May 8, 2019. This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods".
The seller is "pentepug" and is located in Brooklyn, New York. This item can be shipped to United States.