Manfrotto MT055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ2 XPRO Ball Head

You are watching a Brand New with tags. Manfrotto MT055CXPRO3 Carbon Fiber Tripod.

Airs the MT055CXPRO3 Carbon Fiber Tripod with a MHXPRO-BHQ2 XPRO Ball Head. Holding up to 19.8. And with a maximum height of 71.4, the tripod features a Quick Power Lock System that allows you to completely extend the legs with just one hand.

Once set up you can use the MT055CXPRO3's rapid center column in standard vertical mode or swing it into. With Manfrotto's 90° column feature. Enlarged tabs on the individual leg angle selectors allow you to get down low for macro work with the column in horizontal mode. And once you're down there you can attach any of Manfrotto's. Or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod's spider.

The MHXPRO-BHQ2 Ball Head with 200PL Quick-Release System from Manfrotto. Able to hold up to 22. Ball head is strong enough for most applications and ideally suited for an equally sturdy tripod.

The XPRO lets you fine-tune your adjustments, thanks to separate knobs for both the ball and the 360° panning as well as a friction control knob for more exacting placement. Is a 3-section support that replaces the 055CXPRO3 tripod. It has a load capacity of 19.8. Extends from 3.5" to 66.9". Its carbon fiber legs are secured by the Quick Power Locks.

These updated flip locks increase the tripod's rigidity by 50% compared to its predecessor. A redesigned center column has a "one finger" operation, and includes an Easy Link 3/8-16 attachment for attaching accessories such as an LED light or a reflector via a compatible arm. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull's eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes.

Manfrotto MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System. Accurately adjust your camera position with the.

MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System. The 200PL quick-release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes.

Exact pans an easy task. 19.8 lb (9 kg). Maximum Height w/o Column Extended.

4.4 lb (2 kg). Yes, 360° rotating bull's eye. Yes, 2 bull's eye. 3/8"-16 with 1/4"-20 bushing adapter. 4.5 (11.5 cm).

1.1 lb (500 g). I accept Pay Pal only since it is the only way. Please do not hesitate to contact me for any question at any time. I will get back to you within 8-12 hours.

I will not be responsible for any delay during. You might be charged an additional duty charge upon receipt of your package based on your country's laws and regulations. The item shall not show any signs of use. Please contact me to request a return authorization number. Please repack the item carefully. Any reason you feel not.

Do not hesitate and contact me as soon as possible. I will do my best to solve any problem. Your satisfaction - is my success!

If that happens, please contact me immediately. Paying for this item means that you've read and agreed to these listing conditions. The item "Manfrotto MT055CXPRO3 Carbon Fiber Tripod with MHXPRO-BHQ2 XPRO Ball Head" is in sale since Thursday, March 17, 2016.

This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods".ship" and is located in Tel Aviv.

This item can be shipped worldwide.

MPN: Does Not Apply
Brand: Manfrotto