The leg is made of Carbon Fiber, which is very light but very strong at the same time. The tripod leg has mid-level ball leveler that can adjust the level quickly. The tripod also has leveling indicator which is very convenient. The tripod has a center column which can quickly adjust the height.
For example, if you setup the tripod with legs extended to mid-range height, then raise the center column a little to make the desired height. Then if you want to adjust the height quickly, you just need to adjust the center column up or down. It is much faster than adjust the 3 legs and adjust the leveling again. Please see photos for details. This is a very nice portable tripod for carry around for video news or events.
The Manfrotto MVH500AH Fluid Video Head with Flat Base is designed with a wide platform, for HDSLR camera or portable HD camcorders. Smooth and precise, it has a maximum weight load of 11 lb and professional quality fluid cartridges on both its pan and tilt axes. It has a pre-set spring-loaded counterbalance of 5.3 lb, its lateral tilt range is -70°/+90° and it provides 360° panning rotation. This makes it easier and safer to mount your camera on this head. The head attaches to the tripod via a 3/8"-16 thread and includes a 500PLONG sliding balance plate with a captive 1/4"-20 tie-down screw.
The MVH500AH is made from aluminum alloy, measures 3.74 high and provides a bubble level and precision control handle. The Manfrotto 755CX3 MagFibre 2-Stage Tripod Leg features carbon fiber composite leg tubes and fast-action stage clamps. There is also a built-in 50mm half-ball leveling system that can be locked via a detachable rotating grip. This facilitates camera platform leveling without adjusting leg length. The rapid center column adds 10 to the maximum height of the cameras platform.
Lightweight magnesium alloy is used for die-cast parts. Magnesium alloy has a density of 1.74g/cm3 as opposed to aluminum alloy's 2.70g/cm3 - a 35% reduction. Despite its lower weight, magnesium alloy is more rigid than aluminum alloy and has the same strength per volume. Manfrotto tubes are made of 100% carbon fiber in order to reach high quality standards and high levels of performance, rigidity and lightness. Manfrotto pull winding technology to maximize performance, resistance and reliability.The leg has built-in bubble level too. The item "Manfrotto 755CX3 Portable Carbon Fiber Video Tripod withMVH 500 AH Fluid Drag Head" is in sale since Saturday, May 2, 2020. This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods". The seller is "yang6104" and is located in Cuddebackville, New York. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Uruguay.